WTW-AmmoLyt 700 IQ
In-situ-Ammonium sensor with potassium compensation used with IQ Sensor Net Instruments #182 or #2020
- Description
- Technical specifications
- Economic, cost-effective
- Calibration-free, long term stable
- Short response time
| Parameters | Ammonia |
Measuring Ranges/Resolution: NH4-N: 1 … 1000 mg/l / 1 mg/l; 0.1 … 100 mg/l / 0.1 mg/l
pH Range: pH 4 … pH 8.5
Working Life (typically): All electrodes: 18 months (in typical application – sewage plants)
Measuring Accuracy: ±5% of measured value ± 0.2 mg/l in standard solutions
Calibration Procedures: Matrix adjustment against any reference value, 2-point-calibration possible with multiple standard solution
Related Products
-
ChemScan® UV-6101
The Chemscan® UV-6101 Process Analyser has the capability for continuous, on-line, automatic monitoring of up to 8 sample lines. Multiple parameters, detection ranges and data outputs.
-
WTW-282/284 (IQ SensorNet)
The new controller DIQ/S 282/284 is available as 2- (DIQ/S 282) or 4-channel-version (DIQ/S 284). Besides the reagent-free measurement of COD, all other parameters needed for a wastewater treatment plant can be measured. By the combination of multi-parameter sensors, up to 20 parameters can be measured and displayed simultaneously.
-
SAC Measurement WTW UV700 IQ
WTW UV700 IQ SAC – Sensor for continuous measurement of SAC (Spectral Absorption Coefficient) and UVT measurement. Suitable for corrosive environments.
-
UV/Vis Spectrometer System
The intelligent spectral analyzator ISA provides the simultaneous acquisition of multiple parameters with only one sensor in a small form factor. This compact UV/VIS sensor provides both standard water quality parameters and additional substances and water properties applying modern chemometrical methods.
-
WTW-2020 (IQ Sensor Net)
Improve operational efficiency with continuous data. With an easily scalable solution, the 2020 XT allows for the connection of up to 20 sensors. Add sensors at any time and at any location or change them out with ease. This completely modular plug-and-play system allows you to monitor and control the water quality in your wastewater facility continuously and accurately.
- Online Dissolved Oxygen Analyser
- Up to 20 Sensor Inputs from any 700 IQ Sensor
- Digital modular multiparameter system
- Decentralized system for 1 to 20 sensors with integrated terminal
-
WTW-Varion 700 IQ Ammonium
In-situ combination sensor for ammonium and nitrate used with IQ Sensor Net Instruments #182 or #2020.
-
Chemscan® MiniLowAm
Chemscan® MiniLow-Am Reagent Assisted Online Ammonia Analyser for measurement of ammonial in effluent treatment
-
BlueSense Transducer
The BlueSense transducer facilitates the processing and calculation of measurement values of physical and chemical sensors. In addition, the transducer features a full controller function that can cover all process-oriented tasks. The BlueSense transducer is compatible with analogue and digital sensors and actuators of all manufacturers.
-
WTW Optical FDO® 700 IQ Sensor
Optical working D.O. sensor for the measuring and control of oxygen concentration in the biological cleaning process of wastewater plants
-
Chemscan® MiniLowAm
Chemscan® MiniLow-Am Reagent Assisted Online Ammonia Analyser for measurement of ammonial in effluent treatment
