MXD 73/75
MXD 73/75 Surface or Panel Online Galvanic Dissolved Oxygen Analyser – Range 0 – 99.9 PPM and % Saturation 0 – 99.9%.
- Description
- Downloads
Uses Australia’s most proven range of Dissolved Oxygen Sensors with Excellent references from dozens of satisfied Users and is preferred choice of Australia’s two premiere Wastewater Treatment Authorities
• Up to 3 Dissolved Oxygen (or pH/ORP/EC/4-20mA) Inputs. Microprocessor based electronics
• Range 0 – 99.9 PPM and % Saturation 0 – 99.9%
• One step, push button calibration
• Automatic temperature, Altitude, salinity compensation
• 24Vdc or 240Vac Power Supply Voltage
• Up to 6 x Programmable Relays for Setpoints, Jetclean and Error Alarms
• Up to 6 x Isolated 4-20mA or 0-20mA Outputs for Dissolved Oxygen/Temperature (or pH/ORP/EC)
• Use with Model RWT-G95A Galvanic Dissolved Oxygen Sensor
| Parameters | Dissolved Oxygen, ph/ORP, EC, 4-20mA |
The following downloads are available for the MXD 73/75
Download MXD 73/75 Data Sheet PDF
Related Products
-
WTW-NitraLyt 700 IQ
WTW-NitraLyt 700 IQ Nitrate (NO3) Sensor – NO3-N: 1 … 1000 mg/l / 1 mg/l; 0.1 … 100.0 mg/l / 0.1 mg/l and pH 4 … pH 11
-
Aquameta™ CG420-0.5VPU
Glue in pressure transducer for UPVC/CPVC pipe fittings
-
Aquameta™ CR420-0.5NPU
Hydrostatic water level sensor
-
LTH HET63
LTH HET63 Electrodeless Conductivity Transmitter – quality liquid analysis transmitter available in Base and Advanced models.
-
ChemScan® UV-6101
The Chemscan® UV-6101 Process Analyser has the capability for continuous, on-line, automatic monitoring of up to 8 sample lines. Multiple parameters, detection ranges and data outputs.
-
Optical Dissolved Oxygen Meter – HI98198
The HI98198 Optical Dissolved Oxygen Meter makes measuring the concentration of dissolved oxygen hassle-free. Optical DO technology doesn’t require a minimum flow rate, so there is less drift in your readings. Perfect for the field or for the laboratory, the Quick Connect probe requires no membranes, no filling solution, and no warm-up time so you can measure without hesitation. Your meter comes complete in a rugged, custom carrying case for easy transportation.
-
WTW-2020 (IQ Sensor Net)
Improve operational efficiency with continuous data. With an easily scalable solution, the 2020 XT allows for the connection of up to 20 sensors. Add sensors at any time and at any location or change them out with ease. This completely modular plug-and-play system allows you to monitor and control the water quality in your wastewater facility continuously and accurately.
- Online Dissolved Oxygen Analyser
- Up to 20 Sensor Inputs from any 700 IQ Sensor
- Digital modular multiparameter system
- Decentralized system for 1 to 20 sensors with integrated terminal
-
Royce Lagoon Aerator
Innovative Sludge Aeration Technology from Royce Water Technologies. Cleans water and wastewater in ponds, lakes and lagoons using up to 80% less energy.
-
BGD17 – Single Input Controller – Dissolved Oxygen
The BGD17 is a microprocessor controlled instrument range offering individual controllers for the measurement parameters Electrodeless (Inductive) and Contact Conductivity, Dissolved Oxygen Measurement. To achieve this the instrument utilises a clear multifunction LCD to display the primary reading and temperature, show operational status and to provide an intuitive user interface.
-
WTW NitraLyt® Plus
In-situ nitrate/nitrite sensor with optional chlorine compensation.
