WTW-NitraLyt 700 IQ
WTW-NitraLyt 700 IQ Nitrate (NO3) Sensor – NO3-N: 1 … 1000 mg/l / 1 mg/l; 0.1 … 100.0 mg/l / 0.1 mg/l and pH 4 … pH 11
- Description
• Used with IQ Sensor Net Instruments #182 or #2020
• In-situ nitrate sensor with optional chloride compensation
• Economic, cost-effective
• Calibration-free, long term stable
• Short response time
• Measuring Ranges/Resolution: NO3-N: 1 … 1000 mg/l / 1 mg/l; 0.1 … 100.0 mg/l / 0.1 mg/l
pH Range: pH 4 … pH 11
Working Life (typically): All electrodes: 18 months (in typical application – sewage plants)
Measuring Accuracy: ±5% of measured value ± 0.2 mg/l in standard solutions
Calibration Procedures: Matrix adjustment against any reference value, 2-point-calibration possible with multiple standard solution
Related Products
-
Chemscan® UV2150/N
AS-UV2150/N Chemscan® Nitrate (NO3) and Ammonia (NH3) Analyser – Continuous Online Monitoring of up to 2 Sample Lines – Up to 4 x 4-20mA Outputs for each parameter measured
-
Chemscan® UV-2150/N
Continuous, On-line automatic monitoring of Nitrate / Nitrite (2 Parameter analysis with 1 or 2 Sample Lines)
-
WTW NitraLyt® Plus
In-situ nitrate/nitrite sensor with optional chlorine compensation.
-
ChemScan® UV-4100
The Chemscan® UV 4100 Nutrient Analyser measures up to 4 parameters: Dissolved ammonia, total inorganic Phosphate, free and total chlorine, and Nitrate / Nitrite (Percentage of transmittance).
-
WTW Optical FDO® 700 IQ Sensor
Optical working D.O. sensor for the measuring and control of oxygen concentration in the biological cleaning process of wastewater plants
-
WTW-AmmoLyt 700 IQ
In-situ-Ammonium sensor with potassium compensation used with IQ Sensor Net Instruments #182 or #2020
-
ChemScan® UV-6101
The Chemscan® UV-6101 Process Analyser has the capability for continuous, on-line, automatic monitoring of up to 8 sample lines. Multiple parameters, detection ranges and data outputs.
-
WTW-282/284 (IQ SensorNet)
The new controller DIQ/S 282/284 is available as 2- (DIQ/S 282) or 4-channel-version (DIQ/S 284). Besides the reagent-free measurement of COD, all other parameters needed for a wastewater treatment plant can be measured. By the combination of multi-parameter sensors, up to 20 parameters can be measured and displayed simultaneously.
-
WTW VARiON® Plus
Combination sensor for ammonium and nitrate – In-situ – Ion-selective with automatic compensation
-
ChemScan® UV-6101
The Chemscan® UV-6101 Process Analyser has the capability for continuous, on-line, automatic monitoring of up to 8 sample lines. Multiple parameters, detection ranges and data outputs.
